Panasonic kx-th102 User Manual
Preparation
For assistance, please visit http://www.panasonic.com/phonehelp
13
Setting up the base unit
Overview
1
Connect the AC adaptor.
2
Connect the telephone line cord.
Refer to one of the following methods depending on your situation.
Refer to one of the following methods depending on your situation.
L
To connect to a 2-line telephone jack: page 14
L
To connect to 2 single-line telephone jacks: page 14
L
To connect to a single-line telephone jack: page 14
For DSL service subscribers:
L
To connect to a 2-line telephone jack: page 15
L
To connect to 2 single-line telephone jacks: page 15
3
To connect to your LAN, see page 73.
Connecting the AC adaptor
Connect the AC adaptor, then raise the antennas.
L
Use only the included Panasonic AC adaptor PQLV205.
Note:
L
The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel
warm during use.)
warm during use.)
L
The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.
Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.
L
The unit will not work during a power failure. We recommend connecting a standard
telephone to the same telephone line or to the same telephone jack using a Panasonic
T-adaptor (page 6).
telephone to the same telephone line or to the same telephone jack using a Panasonic
T-adaptor (page 6).
(120 V AC, 60 Hz)
Hook
LINE1/2 LINE2
LAN
TH102-C.book Page 13 Monday, March 13, 2006 2:41 PM