Sony CDX-424RF Operating Guide
6
GB
CD Changer
Listening to a CD
1
Turn on the FM tuner of the car audio.
2
Adjust the selected transmitting
frequency with the wired remote.
(88.3 MHz/88.5 MHz/88.7 MHz/
88.9 MHz/ 89.1 MHz/89.3 MHz/
89.5 MHz/89.7 MHz/89.9 MHz)
frequency with the wired remote.
(88.3 MHz/88.5 MHz/88.7 MHz/
88.9 MHz/ 89.1 MHz/89.3 MHz/
89.5 MHz/89.7 MHz/89.9 MHz)
3
Press
^.
CD playback starts.
When the unit is used in a car without an
accessory position on the ignition switch
Be sure to press (OFF) on the wireless remote to
turn the system off to avoid battery wear while
the engine is not running.
accessory position on the ignition switch
Be sure to press (OFF) on the wireless remote to
turn the system off to avoid battery wear while
the engine is not running.
If the POWER SELECT switch on the hideaway unit
is set to the OFF position and the display on the
wired remote is turned off, you will not be able to
start CD playback with the wireless remote. In this
case, press
is set to the OFF position and the display on the
wired remote is turned off, you will not be able to
start CD playback with the wireless remote. In this
case, press
^ on the wired remote .
4
Adjust the volume with the volume
control on the car audio.
All the tracks play from the beginning.
control on the car audio.
All the tracks play from the beginning.
Locating a specific track
— Automatic Music Sensor (AMS)
— Automatic Music Sensor (AMS)
During playback, press either side of
(AMS) once for each track you wish to
skip.
(AMS) once for each track you wish to
skip.
Locating a specific point in a track
— Manual Search
— Manual Search
During playback, press and hold (DISC+)
or (DISC–). Release the button when you
have found the desired part.
or (DISC–). Release the button when you
have found the desired part.
To locate succeeding discs
To locate previous discs
To locate
succeeding tracks
succeeding tracks
To locate
previous tracks
previous tracks
To search forward
To search backward
Locating a specific disc
— Disc Select
— Disc Select
During playback, press (DISC+) or
(DISC–) once for each disc you wish to
skip.
(DISC–) once for each disc you wish to
skip.
Stopping CD play
Press (OFF).
Notes
• When CD playback is stopped, you may hear
• When CD playback is stopped, you may hear
some noise from the speakers. To prevent this
from happening, turn the volume down before
stopping CD playback.
from happening, turn the volume down before
stopping CD playback.
• If you turn off the ignition switch of your car
without stopping CD playback, it will
automatically resume CD playback from where it
was stopped when you turn on the ignition
switch again.
automatically resume CD playback from where it
was stopped when you turn on the ignition
switch again.
Listening to the radio or a tape
Be sure to stop CD playback before you start
listening to the radio or a tape.
listening to the radio or a tape.
Note
Be sure to stop CD playback, otherwise there may
be some interference with radio reception.
Be sure to stop CD playback, otherwise there may
be some interference with radio reception.
AMS
AMS
AMS