Sony CDX-F5710 User Guide
4
CDX-F5710
2-515-319-11 (1)
H:\CDX-F5710\2515319111\2515319111\251531911CDXF5710U\01US02CD-U.fm
masterpage:Left
Getting Started
Resetting the unit
Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
Detach the front panel and press the RESET
button with a pointed object, such as a ball-point
pen.
after replacing the car battery or changing the
connections, you must reset the unit.
Detach the front panel and press the RESET
button with a pointed object, such as a ball-point
pen.
Note
Pressing the RESET button will erase the clock setting
and some stored contents.
Pressing the RESET button will erase the clock setting
and some stored contents.
Setting the clock
The clock uses a 12-hour digital indication.
1
Press
(MENU)
.
2
Press
(GP/PRESET)
+/– repeatedly until
“CLOCK-ADJ” appears.
3
Press
(ENTER)
.
The hour indication flashes.
4
Press
(GP/PRESET)
+/– to set the hour
and minute.
To move the digital indication, press (SEEK)
–/+.
–/+.
5
Press
(ENTER)
.
The clock starts.
To display the clock during playback/reception,
set “CLOCK-ON” (page 11).
set “CLOCK-ON” (page 11).
DEMO mode
When the unit is turned off, the clock is
displayed first, then demonstration (DEMO)
mode starts the demonstration display.
displayed first, then demonstration (DEMO)
mode starts the demonstration display.
To cancel the DEMO mode, set “DEMO-OFF”
in menu (page 11) while the unit is turned off.
in menu (page 11) while the unit is turned off.
Detaching the front panel
You can detach the front panel of this unit to
prevent theft.
prevent theft.
Caution alarm
If you turn the ignition switch to the OFF
position without detaching the front panel, the
caution alarm will sound for a few seconds.
The alarm will only sound if the built-in
amplifier is used.
position without detaching the front panel, the
caution alarm will sound for a few seconds.
The alarm will only sound if the built-in
amplifier is used.
1
Press
(OFF)
.
The unit is turned off.
2
Press
(OPEN)
.
The front panel is flipped down.
3
Slide the front panel to the right, then
gently pull out the left end of the front
panel.
gently pull out the left end of the front
panel.
Notes
• Do not drop or put excessive pressure on the front
• Do not drop or put excessive pressure on the front
panel and display window.
• Do not subject the front panel to heat/high
temperature or moisture. Avoid leaving it in a parked
car or on a dashboard/rear tray.
car or on a dashboard/rear tray.
Tip
When carrying the front panel, use the supplied front
panel case.
When carrying the front panel, use the supplied front
panel case.
RESET
button
button
1
2