Sony cdx-gt720 Manual
10
Customizing the equalizer curve
— EQ3 Tune
— EQ3 Tune
“Custom” of EQ3 allows you to make your own
equalizer settings.
equalizer settings.
1
Select a source, then press the multi
way encoder.
way encoder.
2
Rotate the multi way encoder to select
“EQ3 parametric,” then press it.
“EQ3 parametric,” then press it.
3
Rotate the multi way encoder to select
“Custom,” then push it right.
“Custom,” then push it right.
4
Rotate the multi way encoder to select
“EQ3 Mode Tune,” then press it.
“EQ3 Mode Tune,” then press it.
5
Rotate the multi way encoder to select
the desired frequency range from
“LOW,” “MID” or “HI,” then press it.
the desired frequency range from
“LOW,” “MID” or “HI,” then press it.
6
Rotate the multi way encoder to select
the center frequency you wish to
adjust, then press it.
Selectable frequency in each range:
LOW: 60 Hz or 100 Hz
MID: 500 Hz or 1.0 kHz
HI: 10.0 kHz or 12.5 kHz
the center frequency you wish to
adjust, then press it.
Selectable frequency in each range:
LOW: 60 Hz or 100 Hz
MID: 500 Hz or 1.0 kHz
HI: 10.0 kHz or 12.5 kHz
7
Rotate the multi way encoder to adjust
the equalizer curve.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
the equalizer curve.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
8
Press the multi way encoder.
Repeat steps 5 to 8 to adjust other frequency
ranges.
Repeat steps 5 to 8 to adjust other frequency
ranges.
9
Push (BACK) down twice.
The display returns to normal play/reception
mode.
The display returns to normal play/reception
mode.
To restore the factory-set equalizer curve,
select “EQ3 Mode Initialize” and “Yes” in
step 4.
select “EQ3 Mode Initialize” and “Yes” in
step 4.
Tip
Other equalizer types are also adjustable.
Other equalizer types are also adjustable.
Adjusting setup items — MENU
1
Press and hold the multi way encoder.
2
Rotate the multi way encoder until the
desired menu item appears, then
press it.
desired menu item appears, then
press it.
3
Rotate the multi way encoder to select
the setting, then press it.
The setting is complete.
the setting, then press it.
The setting is complete.
4
Push (BACK) down.
The display returns to normal play/reception
mode.
The display returns to normal play/reception
mode.
The following items can be set (follow the page
reference for details):
“
reference for details):
“
z
” indicates the default settings.
Setup
Display
Clock Adjust (page 4)
Beep
To set “on” (
z
) or “off.”
RM (Rotary Commander)
To change the operative direction of the rotary
commander controls.
– “NORM” (
commander controls.
– “NORM” (
z
): to use the rotary commander in
the factory-set position.
– “REV”: when you mount the rotary
commander on the right side of the steering
column.
column.
Auto Off
To shut off automatically after a desired time
when the unit is turned off: “NO” (
To shut off automatically after a desired time
when the unit is turned off: “NO” (
z
), “30 sec,”
“30 min” or “60 min.”
Demo (Demonstration)
To set “on” (
z
) or “off.”
Image
To set various display images.
– “Movie 1 (
– “Movie 1 (
z
) – 3”: to display a movie.
– “SA 1 – 3”: to display the Spectrum Analyzer.
– “Wall.P 1 – 3”: to display a wallpaper.
– “off”: to not display any image.
– “Wall.P 1 – 3”: to display a wallpaper.
– “off”: to not display any image.
Auto Image
To set various display images.
– “All”: to step repeatedly through the display
– “All”: to step repeatedly through the display
images in all display modes.
– “Movie” (
z
): to display a movie.
– “SA”: to display the Spectrum Analyzer.
– “off”: to not display any image.
– “off”: to not display any image.