Sony CDX M7810 User Guide

Page of 60
5
CDX-M7815X/M7810
2-586-657-11 (1)
H:\Data Disk\2586657111\258665711CDXF7815XU\01US02CD-U.fm
masterpage:Right
H:\Data Disk\2586657111\258665711CDXF7815XU\01US02CD-U.fm
masterpage:Right
Attaching the front panel
Place the hole A of the front panel onto the 
spindle B on the unit, then lightly push the left 
side in.
Press (SOURCE) on the unit (or insert a disc) to 
operate the unit.
Note
Do not put anything on the inner surface of the front 
panel.
Inserting the disc in the unit
1
Press 
Z
.
The front panel slides down automatically.
2
Insert the disc (label side up).
The front panel slides up automatically, then 
playback starts automatically.
Ejecting the disc
1
Press 
Z
.
The front panel slides down automatically, 
then the disc is ejected.
2
Press 
Z
 to close the front panel.
Note
The front panel slides up automatically after 15 
seconds of the front panel sliding down.
Adjusting the angle of the front 
panel
1
Press and hold 
(ANGLE)
 repeatedly 
until the front panel is angled 
accordingly.
The front panel can be set to 3 positions.
To return the front panel to its default position, 
press and hold (ANGLE) repeatedly until the 
front panel is returned to its default position.
Tips
• After the front panel slides down (to insert the disc), 
it returns to the position you set again automatically.
• The front panel angle you set is stored in the unit. 
When the ignition is turned off, the front panel 
returns to its default position. When the ignition is 
turned on, the front panel moves to the angle you 
set.
B
A
ANGLE