Sony CDX-MP30 User Guide
17
Erasing the station name
1
Press (SOURCE) repeatedly to select the
radio.
radio.
2
Press (MODE) repeatedly to select the
band.
band.
3
Press (LIST) for 2 seconds.
4
Press (DSPL) for 2 seconds.
5
Turn the VOL control dial to select the
disc name you want to erase.
disc name you want to erase.
6
Press (SEL) for 2 seconds.
The name is erased.
Repeat steps 5 and 6 if you want to erase
other names.
The name is erased.
Repeat steps 5 and 6 if you want to erase
other names.
7
Press (LIST) for 2 seconds.
The unit returns to normal radio reception
mode.
The unit returns to normal radio reception
mode.
Note
If you have already erased all of the station names,
“NO Data” appears in step 4.
If you have already erased all of the station names,
“NO Data” appears in step 4.
Tuning in a station
through a list
through a list
— List-up
1
During radio reception, press (LIST)
momentarily.
The frequency or the name assigned to the
current station appears in the display.
momentarily.
The frequency or the name assigned to the
current station appears in the display.
2
Press (LIST) repeatedly until you find the
desired station.
If no name is assigned to the selected
station, the frequency appears in the
display.
desired station.
If no name is assigned to the selected
station, the frequency appears in the
display.
3
Press (SEL) to tune in the desired
station.
station.
Storing station names
— Station Memo
You can assign a name to each radio station
and store it in memory. The name of the
station currently tuned in appears in the
display. You can assign a name using up to 8
characters for a station.
and store it in memory. The name of the
station currently tuned in appears in the
display. You can assign a name using up to 8
characters for a station.
Storing the station names
1
Tune in a station whose name you want
to store.
to store.
2
Press (LIST) for 2 seconds.
Name edit mode
3
Enter the characters.
1
Turn the VOL control dial to select the
desired characters.
(A y B y C y ··· Z y 0 y 1 y 2
y ··· 9 y + y – y * y/ y \ y
> y < y . y _ y A ···)
If you want to put a blank space
between characters, select “_.”
desired characters.
(A y B y C y ··· Z y 0 y 1 y 2
y ··· 9 y + y – y * y/ y \ y
> y < y . y _ y A ···)
If you want to put a blank space
between characters, select “_.”
2
Press (SEL) after locating the desired
character.
The next character flashes.
character.
The next character flashes.
3
Repeat steps 1 and 2 to enter the
entire name.
entire name.
4
Press (LIST) for 2 seconds.
Tips
• Simply overwrite or enter “_” to correct or erase
• Simply overwrite or enter “_” to correct or erase
a name.
• If no memory is remaining, “Mem Full” appears
in the display, and you cannot assign a station
name.
name.