Sony CDX-GT740UI Manual
19
Adjusting setup items — SET
1
Press and hold the control dial.
The setup display appears.
The setup display appears.
2
Rotate the control dial until the
desired menu item appears, then
press it.
desired menu item appears, then
press it.
3
Rotate the control dial to select the
setting, then press it.
The setting is complete.
setting, then press it.
The setting is complete.
4
Press
(BACK).
The display returns to normal play/reception
mode.
mode.
Note
Displayed items will differ, depending on the source
and setting.
Displayed items will differ, depending on the source
and setting.
The following items can be set (follow the page
reference for details):
reference for details):
Setup
Display
Play Mode
Clock Adjust (page 6)
Beep
Activates the beep sound: “on,” “off.”
RM (Rotary Commander)
Changes the operative direction of the rotary
commander controls.
– “NORM”: to use the rotary commander in the
commander controls.
– “NORM”: to use the rotary commander in the
factory-set position.
– “REV”: when you mount the rotary
commander on the right side of the steering
column.
column.
AUX Audio*
1
Activates the AUX source display: “on,” “off”
(page 20).
(page 20).
Auto Off
Shuts off automatically after a desired time
when the unit is turned off: “NO,” “30sec
(seconds),” “30min (minutes),” “60min
(minutes).”
when the unit is turned off: “NO,” “30sec
(seconds),” “30min (minutes),” “60min
(minutes).”
Demo (Demonstration)
Activates the demonstration: “on,” “off.”
Image
Sets various display images.
– “All”: to display all images.
– “Movie”: to display a movie.
– “SA 1 – 3, All”: to display the Spectrum
– “All”: to display all images.
– “Movie”: to display a movie.
– “SA 1 – 3, All”: to display the Spectrum
Analyzer.
– “Wall.P 1 – 3, All”: to display a wallpaper.
– “off”: to not display any image.
– “off”: to not display any image.
Information
Display the items (depending on the source,
etc): “on,” “off.”
etc): “on,” “off.”
Dimmer
Changes the display brightness.
– “Auto”: to dim the display automatically when
– “Auto”: to dim the display automatically when
you turn lights on. (Available only when the
illumination control lead is connected.)
illumination control lead is connected.)
– “on”: to dim the display.
– “off”: deactivate the dimmer.
– “off”: deactivate the dimmer.
Illumination
Changes the illumination color: “Blue,” “Red,”
“Green.”
“Green.”
Auto Scroll
Scrolls long items automatically: “on,” “off.”
Local (Local Seek Mode)
– “on”: to only tune into stations with stronger
signals.
– “off”: to tune normal reception.
Mono*
2
(Monaural Mode)
Selects monaural reception mode to improve
poor FM reception: “on,” “off.”
poor FM reception: “on,” “off.”
IF
– “Auto”: to narrow automatically the reception
frequency to eliminate noise.
– “Wide”*
3
: to always hear FM stereo
broadcasts in stereo and with full the
frequency signal reception.
frequency signal reception.
Zappin Time*
4
Selects the playback time for the ZAPPIN
function.
– “1 (about 6 seconds),” “2 (about 9 seconds),”
function.
– “1 (about 6 seconds),” “2 (about 9 seconds),”
“3 (about 30 seconds).”
BTM (page 11)
*1 When the unit is turned off.
*2 When FM is received.
*3 In such cases, some FM stereo broadcasts may
*2 When FM is received.
*3 In such cases, some FM stereo broadcasts may
become monaural while in the stereo reception
mode.
mode.
*4 When CD/USB/iPod source is activated.