Sony dsx-s210x Manual

Page of 72
13
USB devices
For details on the compatibility of your USB 
device, visit the support site.
• MSC (Mass Storage Class) type USB devices 
compliant with the USB standard can be used.
• Corresponding codec is MP3 (.mp3), WMA 
(.wma), AAC (.m4a) and AAC (.mp4).
• Backup of data in a USB device is 
recommended.
Notes
• Connect the USB device after starting the engine.
Depending on the USB device, malfunction or 
damage may occur if it is connected before starting 
the engine.
• Do not place a cellular phone or a device with 
wireless communication functions on the TUNE 
TRAY, as it may not receive phone signals or 
communication may be terminated.
• Do not leave a USB device in a parked car, as 
malfunction may result.
Playing back a USB device
A USB device can be connected to the internal/
external or both USB connectors. To switch 
between USB devices, press (MODE).
Playing back via the USB (internal) 
connector
1
Press (OPEN).
The front panel is flipped down.
2
Press PUSH OPEN on the TUNE TRAY.
The TUNE TRAY opens slowly.
3
Connect the USB device to the USB 
connector.
4
Slide in the TUNE TRAY by pressing 
PUSH CLOSE on the TUNE TRAY until 
it locks shut.
5
Close the front panel.
6
Press (SOURCE/OFF) repeatedly until
“USB” appears, and then press 
(MODE) to switch the USB device.
“USB Internal” appears, and playback starts.
If a USB device is already connected, to start 
playback, repeat step 6.
Press and hold (SOURCE/OFF) for 1 second to 
stop playback.
Removing the USB device
Stop the USB device playback.
Press (OPEN).
Press PUSH OPEN on the TUNE TRAY.
Remove the USB device.
Slide in the TUNE TRAY, and close the front 
panel.
Support site
http://esupport.sony.com
http://www.sony.com/mobileAV
TUNE TRAY