Sony dsx-s210x Manual
33
Error displays/Messages
USB playback
You cannot play back items via a USB hub.
This unit cannot recognize USB devices via a USB
hub.
hub.
Cannot play back items.
A USB device does not work.
t Reconnect it.
t Reconnect it.
The USB device takes longer to play back.
The USB device contains files with a complicated tree
structure.
structure.
The display items do not scroll.
• A large number of characters may not scroll.
• “Auto Scroll” is set to “off.”
• “Auto Scroll” is set to “off.”
t Set “Auto Scroll on” (page 28).
t Press and hold (DSPL) (SCRL).
t Press and hold (DSPL) (SCRL).
The sound is intermittent.
The sound may be intermittent at a high-bit-rate of
more than 320 kbps.
more than 320 kbps.
Pandora connection is not possible.
Shut down Pandora on the mobile device, and then
launch again.
launch again.
Checking
The unit is confirming the connection of a USB device.
t Wait until confirming the connection is finished.
t Wait until confirming the connection is finished.
Device Inside
If you turn the ignition switch to the OFF position
without removing the USB device or iPod, “Device
Inside” will appear in the display.
without removing the USB device or iPod, “Device
Inside” will appear in the display.
Error
USB device was not automatically recognized.
t Reconnect it again.
t Reconnect it again.
Failure (Illuminates until any button is pressed.)
The connection of speakers/amplifiers is incorrect.
t See the installation guide manual of this model to
t See the installation guide manual of this model to
check the connection.
Failure (Illuminates for about 1 second.)
When the SAT tuner is connected, storing an SAT
radio channel into a preset failed.
t Be sure to receive the channel that you want to
radio channel into a preset failed.
t Be sure to receive the channel that you want to
store, then try it again.
Hubs Not Supported
USB hub is not supported on this unit.
Invalid channel file
A file in the music folder may have been edited
without using “Content Transfer.”
t Perform “SensMe™ Setup” for the USB device or
without using “Content Transfer.”
t Perform “SensMe™ Setup” for the USB device or
Walkman again. For details on SensMe™ setup, see
page 15.
page 15.
Local Seek +/–
The local seek mode is on during automatic tuning.
NO Device
USB is selected as source without a USB device
connected. A USB device or a USB cable has been
disconnected during playback.
t Be sure to connect a USB device and USB cable.
connected. A USB device or a USB cable has been
disconnected during playback.
t Be sure to connect a USB device and USB cable.
NO Music
The USB device does not contain a music file.
t Connect a USB device with a music file in it.
t Connect a USB device with a music file in it.
NO Name
An album/artist/track name is not written in the track.
No SensMe™ data on device.
The connected USB device does not contain data for
the SensMe™ function, or the data has been moved to
an improper location in the USB device.
the SensMe™ function, or the data has been moved to
an improper location in the USB device.
NO Track
The selected item in the USB device does not contain
an album/track.
an album/track.
Not Found
There is no item beginning with the desired letter in
Alphabet search.
Alphabet search.
Not Supported
The connected USB device is not supported.
t For details on the compatibility of your USB
t For details on the compatibility of your USB
device, visit the support site.
continue to next page
t