Sony dsx-s210x Manual
6
2
Getting Started
Resetting the unit
Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
Detach the front panel (page 7) and press the
RESET button (page 8) with a pointed object,
such as a ball-point pen.
after replacing the car battery or changing the
connections, you must reset the unit.
Detach the front panel (page 7) and press the
RESET button (page 8) with a pointed object,
such as a ball-point pen.
Note
Pressing the RESET button will erase the clock setting
and some stored contents.
Pressing the RESET button will erase the clock setting
and some stored contents.
Canceling the Demo mode
You can cancel the demonstration display which
appears during turning off.
appears during turning off.
1
Press and hold the multi-way encoder.
The setup display appears.
The setup display appears.
2
Rotate the multi-way encoder to select
“Demo,” then press it.
“Demo,” then press it.
3
Rotate the multi-way encoder to select
“off.”
“off.”
4
Press and hold the multi-way encoder.
The setup is complete and the display returns
to normal reception/play mode.
The setup is complete and the display returns
to normal reception/play mode.
Preparing the card remote
commander
commander
Remove the insulation film.
Tip
For how to replace the battery, see page 29.
For how to replace the battery, see page 29.
Setting the clock
The clock uses a 12-hour digital indication.
1
Press and hold the multi-way encoder.
2
Rotate the multi-way encoder to select
“Clock Adjust,” then press it.
The clock adjustment display appears.
“Clock Adjust,” then press it.
The clock adjustment display appears.
3
Rotate the multi-way encoder to set
the hour and minute.
To move the digital indication, push the
multi-way encoder left/right.
the hour and minute.
To move the digital indication, push the
multi-way encoder left/right.
4
After setting the minute, press the
multi-way encoder.
The clock starts.
multi-way encoder.
The clock starts.