Sony XR-CA300 Operating Guide
15
GB
Other Functions
Adjusting the sound
characteristics
characteristics
You can adjust the bass, treble, balance, and
fader.
You can store the bass and treble levels
independently for each source.
fader.
You can store the bass and treble levels
independently for each source.
1
Select the item you want to adjust by
pressing (SEL) repeatedly.
Each time you press (SEL), the item
changes as follows:
pressing (SEL) repeatedly.
Each time you press (SEL), the item
changes as follows:
BAS (bass) t TRE (treble) t
BAL (left-right) t FAD (front-rear)
2
Adjust the selected item by pressing
either side of the volume button.
Adjust within three seconds after selecting
the item.
either side of the volume button.
Adjust within three seconds after selecting
the item.
Attenuating the sound
Press (ATT).
After “ATT-ON” momentarily flashes, the
“ATT” indication appears in the display.
After “ATT-ON” momentarily flashes, the
“ATT” indication appears in the display.
To restore the previous volume level, press
(ATT) again.
“ATT-OFF” flashes momentarily.
(ATT) again.
“ATT-OFF” flashes momentarily.
Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes
in (Telephone ATT function).
(XR-CA310/ illumination:green only)
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes
in (Telephone ATT function).
(XR-CA310/ illumination:green only)
Changing the sound and
display settings
display settings
The following items can be set:
• CT (Clock Time) (page 14).
• A.SCRL (Auto Scroll)* (page 17).
• M.DSPL (Motion Display)
• CT (Clock Time) (page 14).
• A.SCRL (Auto Scroll)* (page 17).
• M.DSPL (Motion Display)
– the demonstration mode which appears
when the tape is ejected and no source is
selected (e.g., tuner is turned off).
when the tape is ejected and no source is
selected (e.g., tuner is turned off).
• BEEP – to turn the beep sound on or off.
1
Press (SEL).
2
Press the preset number button to select
the desired item.
the desired item.
Number buttons
(2): CT
(3): A.SCRL*
(4): M.DSPL
(6): BEEP
(3): A.SCRL*
(4): M.DSPL
(6): BEEP
* When no CD or MD is playing, this item will
not appear (XR-CA300/CA310 only).
Note
The displayed item will differ depending on the
source.
The displayed item will differ depending on the
source.
3
Press the preset number button
repeatedly to select the desired setting
(Example: ON or OFF).
repeatedly to select the desired setting
(Example: ON or OFF).