Hisense kf-2302gwe User Guide

Page of 43
1HOUR
   
Composition of the Air Conditioner
Remote Control Unit (continued)
7
          : The air conditioner starts at the set time.
          : The air conditioner automatically decides the fan speeds.
          : High fan speed
          : Medium fan speed
          : Low fan speed
          : When you press this button, regardless of  whether the unit is 
operating or stopping , the unit operates for one hour and then shuts down.
Puts the remote control unit into pre-operation status. Always press this 
button after replacing the batteries.
When you press this button (use a small-tipped object such as a ballpoint 
pen), the           
             mark will appear at the display. And the room temperature is 
detected by the sensor which is built into the indoor unit and the air 
conditioner is controlled accordingly.
If the remote control is located near a heat source, such as a space heater 
or in direct sunlight, press the A/C SENSOR button to switch to the sensor 
in the indoor unit.
          : The air conditioner stop at the set time.
This button is used   to set/cancel the time at which you wish the air 
conditioner to go on or off.
Use this button to select AUTO, DRY or COOL mode.
         : When this setting is selected, the air conditioner calculates 
the difference between the set thermostat and the room temperature 
and automatically switches mode appropriately. 
          : The air conditioner reduces the humidity in the room.
          : The air conditioner makes the room cool.
          : The air conditioner makes the room's temperature suitable.
Press this button either to select to set the airflow direction to one of 
the six possible positions manually, or to select the sweep function, 
which moves the flap up and down automatically.
          : The airflow direction can be set manually.(six positions)
          : The flap moves up and down automatically.
              :  Press  the  FLAP  button  and  set  the  airflow  directions  as 
desired.(refer to Adjust the Airflow Direction).
TIMER ON button
TIMER OFF button
TIMER SET/CANCEL button
MODE selector button
(AUTO)
(DRY)
(COOL)
(FAN)
FLAP button
FAN SPEED selector button
1 HR. TIMER button
(1-HOUR OFF TIMER)
ACL button
A/C SENSOR button
NOTE
ON
OFF