Hisense kf-34gwe User Guide

● In the event of power failure, the unit will stop. When the power is resumed, 
     the unit will restart automatically after three minutes.

● In heating or cooling operation. Some plastic parts may expand of   shrink  due  to  a  
    sudden temperature change. In this event, a clicking sound may occur. This is normal,
    and the sound will soon disappear.

● The remote control unit sends the temperature signal to the air conditioner  regularly
     at three-minute intervals. If the signal from the remote control  unit  stops  for   more 
     than ten minutes due to the loss of the remote control unit or  other trouble,   the  air 
     conditioner will switch to the temperature sensor which is built  into  the  indoor  unit
     and  control  the  room  temperature.  In  these  cases,  the temperature around the
     remote control unit may differ from the temperature  detected at the air conditioner’s
     position.

C

1HR

ON/OFF

TEMP

HIGH

POWER

FLAP

ON

OFF

SET

CANCEL

SLEEP

A/C SENSOR

ACL

BATTERY

FAN

SPEED

MODE

AUTO

AUTO

    Night Setback Mode is used for saving energy. Press the SLEEP 
button
       in operation. The             mark appears   in the display. To 

NOTE     This function loses in automation or airflow mode.

A.In Cooling and DRY Mode:
When     the   night     setback mode is selected, the air 
conditioner  automatically    raises    the    temperature,     

setting   1℃   when   60 minutes have passed, after the 

selection was made ,and then another  1℃ after another 60 
minutes  have  passed  and  at  last  stops  operating 
automatically after   lasting   about   6   hours at this 

temperature,  regardless  of  the  indoor  temperature  when 

night setback was selected. This enables you to save energy 
without    sacrificing    comfort.    This  function  is 
convenient when gentle cooling is needed.

1

2

3

4

5

6

7

8

Setting

temperature

Stop operating
Automatically

(Hour)

Press the SLEEP button

1℃

1℃

14