Cisco WVC2300 User Guide
Sample Configurations
Configuring Port Forwarding
Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide
117
9
extending the window with the cursor. More than one window can be
used at once.
used at once.
STEP 4
Use the Threshold slider to adjust the motion sensitivity. Less threshold means
more sensitivity.
more sensitivity.
STEP 5
Click Save.
Configuring Port Forwarding
Port forwarding allows Internet access to multiple cameras that are located inside
a private network. For example, you have two cameras behind a NAT router – one
is on alternate port 1024 and the second one is on port 1028. To access each
camera individually, setup two port forwarding rules to access the web interface
of the camera. You can then go to http://x.x.x.x:####/ where x.x.x.x is the WAN IP of
the router and #### is the defined alternate port on the camera.
a private network. For example, you have two cameras behind a NAT router – one
is on alternate port 1024 and the second one is on port 1028. To access each
camera individually, setup two port forwarding rules to access the web interface
of the camera. You can then go to http://x.x.x.x:####/ where x.x.x.x is the WAN IP of
the router and #### is the defined alternate port on the camera.
To set up port forwarding, follow these steps:
STEP 1
From the camera’s web-based utility, click Setup > Advanced Setup. The
Advanced Setup window displays.
Advanced Setup window displays.