Pentax q User Manual

Page of 258
38
Getti
n
g
 S
tar
ted
2
4
When the battery is fully charged, remove the battery from 
the battery charger.
1
Slide the battery cover in the 
direction of the arrow, and then 
lift it to open (
1
→2).
• Do not use the provided Battery Charger D-BC68P to charge batteries other 
than rechargeable lithium-ion battery D-LI68. Charging other batteries may 
cause damage or heating.
• Replace the battery with a new one in the following cases:
- If the indicator lamp blinks or does not light after the battery is inserted 
correctly
- If the battery starts to run down more quickly even after being charged (the 
battery may have reached the end of its service life)
The maximum charging time is approximately 115 minutes (it depends on 
temperature and remaining battery power). Charge in a location where the 
temperature is between 0°C and 40°C.
Inserting/Removing the Battery
• Insert the battery correctly. If the battery is inserted incorrectly, it may not be 
removed. Wipe the electrodes of the battery with a soft dry cloth before 
inserting.
• Do not open the battery cover or remove the battery while the power is on.
• Be careful as the camera or battery may become hot when the camera is 
used continuously for a long period of time.
• Remove the battery when you will not use the camera for a long while. The 
battery may leak.
• The date and time may be reset if you leave the battery out of the camera for 
long periods of time. If this occurs, follow the procedure described in “Setting 
the Date and Time” (p.50) 
to reset the date and time. 
2
1