Trendnet TE100-S24 Specification Guide

TRENDnet's TE100-S24 is a high performance, auto-sensing 
24-port  NWay  rack-mountable  Fast  Ethernet  Switch.  It  is 
designed  to  eliminate  unnecessary  traffic  and  relieve 
congestion on critical network paths. With 10/100Mbps NWay 
technology, the TE100-S24 automatically negotiates between 
10Base-T and 100Base-TX network speeds, as well as half 
and full duplex modes. The auto MDI-II/MDI-X detection on 
each  port  automatically  detects  and  corrects  for  crossover 
connection  and  allows  direct  switch-to-switch  or  switch-to-
hub connection for your networking needs. 

TE100-S24

Top performance at an affordable 
price. 

Current Ethernet workgroups are able 
to upgrade to Fast Ethernet by 
changing adapters and hubs without 
changing switches. 

All ports automatically negotiate 
10/100Mbps network speed, half/full-
duplex mode, and MDI-II/MDI-X 
connector type. 

Provide 10/100Mbps network 
connection at an affordable rate. 

24 10/100Mbps NWay Auto MDI-II/MDI-X ports 

Integrate address Look-Up Engine, supports up to 8K absolute 
MAC address 

2.5Mb internal RAM for frame buffering 

Full/half duplex transfer mode for each port 

Wire-speed filtering/forwarding rates 

IEEE 802.3x flow control for full-duplex mode 

Back pressure flow control for half-duplex mode 

Store-and-forward switching method 

Extensive front-panel diagnostic LEDs 

No cooling fan, for quite operation 

5-Year Warranty