Trendnet te100-s24plus  Specification Guide

TRENDnet's TE100-S24plus is a high performance, auto-
sensing 24-port NWay rack-mountable Fast Ethernet Switch. 
It is designed to eliminate unnecessary traffic and relieve 
congestion on critical network paths. With 10/100Mbps NWay 
technology, the TE100-S24plus automatically negotiates 
between 10Base-T and 100Base-TX network speeds, as well 
as half and full duplex modes. The TE100-S24plus also has a 
module bay for optional multimode SC type fiber module that 
allows connection to another fiber device up to 2Km away (in 
full-duplex mode). The auto MDI-II/MDI-X detection on each 
port automatically detects and corrects for crossover 
connection and allows direct switch-to-switch or switch-to-
hub connection for your networking needs.

TE100-S24plus

24 10/100Mbps NWay Auto MDI-II/MDI-X ports

Integrate address Look-Up Engine, supports up to 4K 
absolute MAC address

768KB internal RAM for frame buffering

Full/half duplex transfer mode for each port

Wire-speed filtering/forwarding rates

IEEE 802.3x flow control for full-duplex mode

Back pressure flow control for half-duplex mode

Store-and-forward switching method

Extensive front-panel diagnostic LEDs

One module bay for optional one-port 100Base-FX 
multimode SC type fiber connection

5 Year Warranty

Top performance at an affordable 
price.

Current Ethernet workgroups are able 
to upgrade to Fast Ethernet by 
changing adapters and hubs without 
changing switches.

All ports automatically negotiate 
10/100Mbps network speed, half/full-
duplex mode, and MDI-II/MDI-X 
connector type.

Optional 100Base-FX multimode SC 
type module links to other fiber device 
up to 2Km in full-duplex mode.

Provide 10/100Mbps of Fast Ethernet 
at an affordable rate.

What's Next in Networking