Trendnet te100-s24v Specification Guide

TRENDnet’s TE100-S24V 24-Port 10/100Mbps Smart Switch 
is the ideal switch for network segmenting. It has an optional 
fiber optic module that makes the switch flexible enough for 
mid-sized companies and branch offices to meet their high 
bandwidth requirements. By using standard auto-negotiation, 
it provides a cost-effective way of integrating 10Mbps 
segments with 100Mbps Fast Ethernet networks and is ideal 
for extending distances between two 100Mbps network 
segments. Supporting Virtual Local Area Networking (VLAN), 
it is powerful and easy-to-use in reducing unnecessary 
broadcast traffic and enhance network security.

TE100-S24V

24 10/100Mbps Auto-negotiation, Auto-MDIX Fast Ethernet Ports

1 expansion slot for optional 100Base-FX fiber module

Full/Half-Duplex transfer mode for each port

Wire Speed reception and transmission

Store and Forward switching method

Supports 768K bytes RAM data buffering

Extensive diagnostic LED’s on the front panel

Broadcast storm protection

IEEE 802.3x flow control for half-duplex mode

Back pressure flow control for half-duplex mode

Supports Port-Based VLAN (25 groups) and Port-Based / IEEE 802.1p 
QoS (high or low)

Integrated address Look-Up Engine with 4K entries MAC address table

Support Port setting function allow user setting each port 
disable/enable, speed, duplex mode, and device flow control

Supports RS-232 Console port in front panel for configuration

Standard 19” Rack-mount design

 5-Years Warranty

 

Ethernet workgroups are able to 
upgrade to Fast Ethernet by changing 
adapters and a hub without changing 
switches.

Expand the connection up to 2Km with 
optional fiber module (50/125 or 
62.5/125um multimode fiber with SC 
type connector).

Port-based VLAN reduces broadcast 
traffic and enhance network security.

Provides non-blocking high performance 
with internal switch controller.

The TE100-S24V presents 10/100Mbps 
of Fast Ethernet at an affordable rate.

What's Next in Networking