Trendnet tv-ip300Â Information Guide
Q: How can I configure my TV-IP300 (w) through the web-based configuration?
A:
Q: What is the default IP address of my TV-IP300 (w)?
A:
Q: How can I view the TV-IP300 (w) remotely if it’s behind a router or firewall?
A:
Open your web browser and type the IP address of the TV-IP300 in the address bar. The default IP
address is 192.168.0.30.
address is 192.168.0.30.
The default IP address is 192.168.0.30
Each camera behind a firewall or router will need one port forwarded for the video streaming. The
four default ports are:
four default ports are:
1. 80 (TCP) HTTP Port
2. 8481 (TCP/UDP) Control Channel Port
3. 8482 (TCP/UDP) Audio Channel Port
4. 8483 (TCP/UDP) Video Channel Port
2. 8481 (TCP/UDP) Control Channel Port
3. 8482 (TCP/UDP) Audio Channel Port
4. 8483 (TCP/UDP) Video Channel Port
If you are installing multiple cameras you must change the port on the additional cameras.
Camera 1 is using the default ports. Camera 2 must use different ports. For example:
1. 81 (TCP) HTTP Port
2. 8491 (TCP/UDP) Control Channel Port
3. 8492 (TCP/UDP) Audio Channel Port
4. 8493 (TCP/UDP) Video Channel Port
2. 8491 (TCP/UDP) Control Channel Port
3. 8492 (TCP/UDP) Audio Channel Port
4. 8493 (TCP/UDP) Video Channel Port
You can change the ports on the camera on the System tab in the web-configuration page.
Step 1.
Open your web browser and type the IP address of the TV-IP300 (w) in the address
bar. The default IP address is 192.168.0.30.
bar. The default IP address is 192.168.0.30.
Step 2.
Click on “System Administration”.
TV-IP300/TV-IP300W F.A.Q.