3com 4800G Installation Instruction
10
C
HAPTER
1: P
RODUCT
O
VERVIEW
Redundant power
system LED
system LED
RPS
Solid green
The AC power supply is normal and
the RPS is connected and works
normally.
the RPS is connected and works
normally.
Solid yellow
The RPS input is normal, but an AC
input failure occurs or no AC power
is connected.
input failure occurs or no AC power
is connected.
OFF
No RPS is connected.
Module LED
MOD Solid green
The module is in position and works
normally.
normally.
Flashing yellow
The switch does not support the
module or a module failure occurs.
module or a module failure occurs.
OFF
No module is installed.
7-segment digital LED Unit
POST running
The power LED flashes green The LED displays the POST test ID.
POST failed
The power LED flashes red
The LED flashes the POST test ID of
the failed test.
the failed test.
Software loading
The power LED flashes green. A bar rotates clockwise around the
LED.
Fan failure
The power LED is solid red.
The LED displays F.
Over-temperature alarm
The power LED is solid red.
The LED displays t.
Cluster state
The power LED is solid green. For a command switch, the LED
displays C.
For a member switch, the LED
displays S.
displays S.
For a candidate switch, the LED
displays c.
displays c.
The LED displays 1 if there is only one
unit.
unit.
Table 4 LEDs on the front panel of the Switch 4800G 24-Port
LED Mark
Status
Description