3com 3cr13500 User Guide
3COM Security Switch 6200 Hardware and Software Users Guide
3-5
Interface Connections and First Time Start-Up
POST Error
Beep Codes
Beep Codes
The following tables list POST error beep codes. Before system video
initialization, the BIOS and BMC use these beep codes to inform users on
error conditions.
initialization, the BIOS and BMC use these beep codes to inform users on
error conditions.
BMC Generated POST Beep Codes
BIOS Generated POST Error Beep Codes
Code
Description
1-5-1-1
FRB failure (processor failure)
1-5-2-1
Empty Processor
1-5-2-2
No Processor
1-5-4-2
Power fault: DC power unexpectedly lost (power
control failures)
control failures)
1-5-4-3
Chipset control failure
1-5-4-4
Power control failure
Beeps
Error message
Description
1
Refresh timer failure
The memory refresh circuitry on the
motherboard is faulty.
motherboard is faulty.
2
Parity error
Parity can not be reset.
3
Base memory failure
Base memory test failure. See Table 53.
POST Memory Error 3-Beep Codes for
additional error details.
POST Memory Error 3-Beep Codes for
additional error details.
4
System timer
System timer is not operational.
5
Processor failure
Processor failure detected.
6
Keyboard controller Gate
A20 failure
A20 failure
The keyboard controller may be bad. The
BIOS cannot switch to protected mode.
BIOS cannot switch to protected mode.
7
Processor exception
interrupt error
interrupt error
The CPU generated an exception
interrupt.
interrupt.
8
Display memory read/write
error
error
The system video adapter is either
missing or its memory is faulty. This is
not a fatal error.
missing or its memory is faulty. This is
not a fatal error.
9
ROM checksum error
System BIOS ROM checksum error.
10
Shutdown register error
Shutdown CMOS register read/write
error detected.
error detected.
11
Invalid BIOS
General BIOS ROM error.