3com 3cr13500 User Guide

Configuring the Security Switch 6200 System

Configuration
=========
1) System Parameters 
2) User Accounts 
3) Network Time Protocol (NTP) 
4) Domain Name Service (DNS) 
5) Simple Network Management Protocol (SNMP) 
6) Physical Interfaces 
7) Tap Interfaces 
8) Network Interfaces 
9) IP Aliases 
10) Static Routes 
11) Static ARP Entries 
12) Virtual Router Redundancy Protocol (VRRP) 
X) Exit                                                                      

To begin your configuration, select the desired option from the main menu.

NOTE: Within this configuration tool, you can type the initial letter of an 
option and the press the Tab key to complete the entire string on supported 
choices. The Enter key is used to select default values.

This section describes how to change your system settings. Specifically, 
how to:

• Change the system host name and domain name

• Change system information

• Change time information

• Enable external access ability

To configure system parameters:

1.

Select Option 1 from the main menu.

The present System Configuration is displayed. For example:

System
======
Host Name       helios
Domain Name 
Date and Time   Mon Apr 07 15:28:27 EDT 2003
Time Zone 
Telnet Server   enabled
FTP Server      enabled
WEB Timeout     20
Default Gateway 192.168.10.1

Would You Like to Modify the System Parameters <Y or 
N>[N]: