3com 5500-EI Quick Setup Guide
Upgrading from the Command Line Interface
91
(where aaa.aaa.aaa.aaa is the IP address of the TFTP server)
Replace unit1 with unit2 and _1.cfg with _2.cfg and so on for
each switch in the fabric.
each switch in the fabric.
3 The Web user interface file and the application file must be the same on
all switches in the fabric. It is not necessary to backup these files because
they will have a new version number.
they will have a new version number.
TFTP
To upgrade software to your switch via TFTP do the following:
1 To download the application file, enter:
tftp aaa.aaa.aaa.aaa get s4a03_01_04s56.app
(where aaa.aaa.aaa.aaa is the IP address of the TFTP server)
s4a
indicates the switch filename, see Table 24 for further details:
Table 24 Switch 5500 Family Filenames
2 To download the Web user interface file, enter:
tftp aaa.aaa.aaa.aaa get s4h01_04.web
3 To download the default configuration file, enter
tftp aaa.aaa.aaa.aaa get 3ComOScfg.def
4 To download the bootrom file, enter:
tftp aaa.aaa.aaa.aaa get s4e01_04.btm
The bootrom firmware may not require upgrading for every software
upgrade. To display the bootrom firmware version in any view enter:
upgrade. To display the bootrom firmware version in any view enter:
display version
The following should be displayed:
Bootrom version is 1.04
Filename Prefix
Switch
s4a
SuperStack 4 Switch 5500-SI software
s4b
SuperStack 4 Switch 5500-EI software
s4c
SuperStack 4 Switch 5500G-EI software
s4e
SuperStack 4 Switch 5500 Family bootrom software