3com 5500-ei pwr Installation Instruction

 

1-28 

Figure 1-5 Network diagram for the HTTP test 

 

 

 

z 

Configure HTTP Server: 

Use Windows 2003 Server as the HTTP server. For HTTP server configuration, refer to the related 

instruction on Windows 2003 Server configuration. 

z 

Configure remote-ping Client (Switch A): 

# Enable the remote-ping client. 

<Sysname> system-view 

[Sysname] remote-ping-agent enable 

# Create a remote-ping test group, setting the administrator name to administrator and test tag to 

HTTP. 

[Sysname] remote-ping administrator http 

# Configure the test type as http.  

[Sysname-remote-ping-administrator-http] test-type http 

# Configure the IP address of the HTTP server as 10.2.2.2.  

[Sysname-remote-ping-administrator-http] destination-ip 10.2.2.2 

# Configure to make 10 probes per test.  

[Sysname-remote-ping-administrator-http] count 10 

# Set the probe timeout time to 30 seconds. 

[Sysname-remote-ping-administrator-http] timeout 30 

# Start the test.  

[Sysname-remote-ping-administrator-http] test-enable 

# Display test results 

[Sysname-remote-ping-administrator-http] display remote-ping results administrator http 

  remote-ping entry(admin administrator, tag http) test result: 

      Destination ip address:10.2.2.2 

      Send operation times: 10              Receive response times: 10 

      Min/Max/Average Round Trip Time: 47/87/74 

      Square-Sum of Round Trip Time: 57044 

      Last succeeded test time: 2000-4-2 20:41:50.4 

  Extend result: 

      SD Maximal delay: 0                   DS Maximal delay: 0 

      Packet lost in test: 0% 

      Disconnect operation number: 0        Operation timeout number: 0