3com 5500-ei pwr Installation Instruction

 

1-11 

MSDP view 

Configure MSDP 
parameters 

[Sysname-msdp] 

Execute the msdp 
command in 
system view. 

PoE profile 
view 

Configure PoE 
profile parameters 

[Sysname-poe-pro
file-a123] 

Execute the 
poe-profile 
command in 
system view. 

Smart link 
group view 

Configure smart 
link group 
parameters 

[Sysname-smlk-gr
oup1] 

Execute the 
smart-link group 
command in 
system view. 

Monitor link 
group view 

Configure monitor 
link group 
parameters 

[Sysname-mtlk-gro
up1] 

Execute the 
monitor-link 
group command in 
system view. 

Detected 
group view 

Configure detected 
group parameters 

[Sysname-detect-g
roup-1] 

Execute the 
detect-group 
command in 
system view. 

QinQ view 

Configure QinQ 
parameters 

[Sysname-Etherne
t1/0/1-vid-20] 

Execute the 
vlan-vpn vid 
command in 
Ethernet port view. 

The vlan-vpn 
enable command 
should be first 
executed. 

Execute the 
quit command 
to return to 
Ethernet port 
view. 

Execute the 
return 
command to 
return to user 
view. 

 

The shortcut key <Ctrl+Z> is equivalent to the return command.  

 

When configuring the switch, you can use the online help to get related help information. The CLI 

provides two types of online help: complete and partial. 

1)  Enter a question mark (?) in any view on your terminal to display all the commands available in the 

view and their brief descriptions. The following takes user view as an example. 

<Sysname> ? 

User view commands: 

  backup           Backup current configuration