3com 5500-ei pwr Installation Instruction
1-2
User Interface Index
Two kinds of user interface index exist: absolute user interface index and relative user interface index.
1) The absolute user interface indexes are as follows:
z
The absolute AUX user interfaces are numbered 0 through 7.
z
VTY user interface indexes follow AUX user interface indexes. The first absolute VTY user
interface is numbered 8, the second is 9, and so on.
2) A relative user interface index can be obtained by appending a number to the identifier of a user
interface type. It is generated by user interface type. The relative user interface indexes are as
follows:
z
AUX user interfaces are numbered from AUX0 to AUX7.
z
VTY user interfaces are numbered VTY0, VTY1, and so on.
Switch 5500-EI support Fabric. A Fabric can contain up to eight devices. Accordingly, the AUX user
interfaces in a Fabric can be numbered from AUX0 to AUX7, through which all the console ports of the
units in a Fabric can be identified. Refer to the XRN Fabric part for information about Fabric.
Common User Interface Configuration
Follow these steps to configure common user interface:
To do…
Use the command…
Remarks
Lock the current user
interface
interface
lock
Optional
Available in user view
A user interface is not locked
by default.
by default.
Specify to send messages
to all user interfaces/a
specified user interface
to all user interfaces/a
specified user interface
send { all | number | type number }
Optional
Available in user view
Free a user interface
free user-interface [ type ] number
Optional
Available in user view
Enter system view
system-view
—
Set the banner
header [ incoming | legal | login |
shell ] text
shell ] text
Optional
By default, no banner is
configured
configured
Set a system name for the
switch
switch
sysname string
Optional
Enable copyright
information displaying
information displaying
copyright-info enable
Optional
By default, copyright
displaying is enabled. That is,
the copy right information is
displayed on the terminal after
a user logs in successfully.
displaying is enabled. That is,
the copy right information is
displayed on the terminal after
a user logs in successfully.