3com 5500-ei pwr Installation Instruction

 

2-16 

Enter system view 

— 

Create a RADIUS scheme and 
enter its view 

radius scheme 
radius-scheme-name 

Required 

By default, a RADIUS scheme 
named "system" has already 
been created in the system. 

Set the format of the 
usernames to be sent to 
RADIUS server 

user-name-format 
{ with-domain | 
without-domain } 

Optional 

By default, the usernames sent 
from the switch to RADIUS 
server carry ISP domain 
names. 

Set the units of data flows to 
RADIUS servers 

data-flow-format data { byte | 
giga-byte | kilo-byte | 
mega-byte } packet 
{ giga-packet | kilo-packet | 
mega- packet | one-packet } 

Optional 

By default, in a RADIUS 
scheme, the data unit and 
packet unit for outgoing 
RADIUS flows are byte and 
one-packet respectively. 

Set the MAC address format of 
the Calling-Station-Id (Type 31) 
field in RADIUS packets 

calling-station-id mode 
{ mode1 | mode2 } 
{ lowercase | uppercase } 

Optional 

By default, the MAC address 
format is XXXX-XXXX-XXXX, 
in lowercase. 

RADIUS scheme view 

nas-ip ip-address 

Set the source IP address of 
outgoing RADIUS messages 

System view 

radius nas-ip ip-address 

Optional 

By default, no source IP 
address is set; and the IP 
address of the corresponding 
outbound interface is used as 
the source IP address.