3com 5500-ei pwr Installation Instruction

 

3-10 

z 

Check if an address pool that is on the same network segment with the DHCP clients is configured 

on the DHCP server. 

z 

Check if a reachable route is configured between the DHCP relay agent and the DHCP server. 

z 

Check the DHCP relay agent. Check if the correct DHCP server group is configured on the 

interface connecting the network segment where the DHCP client resides. Check if the IP address 

of the DHCP server group is correct. 

z 

If the address-check enable command is configured on the interface connected to the DHCP 

server, verify the DHCP server’s IP-to-MAC address binding entry is configured on the DHCP relay 

agent; otherwise the DHCP client cannot obtain an IP address.