3com 5500-ei pwr Installation Instruction
4-7
Configuring a handling policy for DHCP packets with Option 82
Follow these steps to configure a handling policy for DHCP packets with Option 82:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Configure a global handling
policy for requests that contain
Option 82
policy for requests that contain
Option 82
dhcp-snooping information
strategy { drop | keep |
replace }
strategy { drop | keep |
replace }
Optional
The default handling policy is
replace.
replace.
Enter Ethernet port view
interface interface-type
interface-number
interface-number
—
Configure a handling policy for
requests that contain Option 82
received on the specified
interface
requests that contain Option 82
received on the specified
interface
dhcp-snooping information
strategy { drop | keep |
replace }
strategy { drop | keep |
replace }
Optional
The default policy is replace.
If a handling policy is configured on a port, this configuration overrides the globally configured handling
policy for requests received on this port, while the globally configured handling policy applies on those
ports where a handling policy is not natively configured.
Configuring the storage format of Option 82
S5500-EI Series Ethernet Switches support the HEX or ASCII format for the Option 82 field.
Follow these steps to configure a storage format for the Option 82 field:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Configure a storage format
for the Option 82 field
for the Option 82 field
dhcp-snooping information
format { hex | ascii }
format { hex | ascii }
Optional
By default, the format is hex.
The dhcp-snooping information format command applies only to the default content of the Option 82
field. If you have configured the circuit ID or remote ID sub-option, the format of the sub-option is ASCII,
instead of the one specified with the dhcp-snooping information format command.
Configuring the circuit ID sub-option
Follow these steps to configure the circuit ID sub-option:
To do…
Use the command…
Remarks
Enter system view
system-view
—