3com 5500-ei pwr Installation Instruction
2-4
To do…
Use the command…
Remarks
Configure the
mode to apply a
QoS profile as
port-based
mode to apply a
QoS profile as
port-based
qos-profile
port-based
port-based
Specify the
mode to
apply a
QoS profile
mode to
apply a
QoS profile
Configure the
mode to apply a
QoS profile as
user-based
mode to apply a
QoS profile as
user-based
undo qos-profile
port-based
port-based
Optional
By default, the mode to
apply a QoS profile is
user-based.
apply a QoS profile is
user-based.
z
If the 802.1x
authentication mode is
MAC address-based, the
mode to apply a QoS
profile must be
configured user-based.
authentication mode is
MAC address-based, the
mode to apply a QoS
profile must be
configured user-based.
z
If the 802.1x
authentication mode is
port-based, the mode to
apply a QoS profile must
be configured as
port-based.
authentication mode is
port-based, the mode to
apply a QoS profile must
be configured as
port-based.
Follow these steps to apply a QoS profile manually:
To do…
Use the command…
Remarks
Enter system view
system-view
—
In system view
apply qos-profile
profile-name interface
interface-list
profile-name interface
interface-list
Enter
Ethernet port
view
Ethernet port
view
interface interface-type
interface-number
interface-number
Apply a QoS
profile to
specific
ports
profile to
specific
ports
In Ethernet
port view
port view
Apply a QoS
profile to the
current port
profile to the
current port
apply qos-profile
profile-name
profile-name
Select either
of the
operations.
of the
operations.
By default, a
port has no
QoS profile
applied to it.
port has no
QoS profile
applied to it.
Displaying and Maintaining QoS Profile Configuration
To do…
Use the command…
Remarks
Display QoS profile
configuration
configuration
display qos-profile { all | name
profile-name | interface
interface-type interface-number |
user user-name }
profile-name | interface
interface-type interface-number |
user user-name }
Available in any view