3com 5500-ei pwr Installation Instruction
2-3
Displaying PoE Profile Configuration
To do…
Use the command…
Remarks
Display the detailed information
about the PoE profiles created
on the switch
about the PoE profiles created
on the switch
display poe-profile
{ all-profile |
interface
interface-type interface-number |
name profile-name
}
Available in any
view
view
PoE Profile Configuration Example
PoE Profile Application Example
Network requirements
Switch A is a Switch 5500-EI supporting PoE.
Ethernet 1/0/1 through Ethernet 1/0/10 of Switch A are used by users of group A, who have the following
requirements:
requirements:
z
The PoE function can be enabled on all ports in use.
z
Signal mode is used to supply power.
z
The PoE priority for Ethernet 1/0/1 through Ethernet 1/0/5 is Critical, whereas the PoE priority for
Ethernet 1/0/6 through Ethernet 1/0/10 is High.
Ethernet 1/0/6 through Ethernet 1/0/10 is High.
z
The maximum power for Ethernet 1/0/1 through Ethernet 1/0/5 ports is 3000 mW, whereas the
maximum power for Ethernet 1/0/6 through Ethernet 1/0/10 is 15400 mW.
maximum power for Ethernet 1/0/6 through Ethernet 1/0/10 is 15400 mW.
Based on the above requirements, two PoE profiles are made for users of group A.
z
Apply PoE profile 1 for Ethernet 1/0/1 through Ethernet 1/0/5;
z
Apply PoE profile 2 for Ethernet 1/0/6 through Ethernet 1/0/10.