3com 5500-ei pwr Installation Instruction

Page of 1072
 
1-19 
 
When you display the cluster topology information, the devices attached to the switch that is listed in the 
backlist will not be displayed. 
 
Cluster Configuration Examples 
Basic Cluster Configuration Example 
Network requirements 
Three switches compose a cluster, where: 
A Switch 5500-EI series switch serves as the management device. 
The rest are member devices. 
Serving as the management device, the Switch 5500-EI switch manages the two member devices. The 
configuration for the cluster is as follows: 
The two member devices connect to the management device through Ethernet 1/0/2 and Ethernet 
1/0/3. 
The management device connects to the Internet through Ethernet 1/0/1. 
Ethernet 1/0/1 belongs to VLAN 2, whose interface IP address is 163.172.55.1. 
All the devices in the cluster share the same FTP server and TFTP server. 
The FTP server and TFTP server use the same IP address: 63.172.55.1. 
The NMS and logging host use the same IP address: 69.172.55.4. 
Network diagram 
Figure 1-4 Network diagram for HGMP cluster configuration 
Internet
Eth 1/0/1
Eth 1/0/3
Eth 1/0/2
Eth 1/0/1
Eth 1/0/1
69.172.55.4
SNMP/logging host(NMS)
FTP/TFTP Server
63.172 .55.1
163.172 .55.1
VLAN-interface 2
Management 
device
Cluster
Member device
 MAC: 000f .e201. 0011
 MAC: 000f. e201. 0012
Member device
 
 
Configuration procedure 
1)  Configure the member devices (taking one member as an example)