3com 5500-ei pwr Installation Instruction

 

1-6 

Follow these steps to configure extended trap function: 

Enter system view 

— 

Configure the extended trap 
function 

Optional 

By default, the linkUp/linkDown 
trap adopts the standard format 
defined in IF-MIB. For details, refer 
to RFC 1213. 

 

Follow these steps to enable logging for network management: 

Enter system view 

— 

Enable logging for network 
management 

snmp-agent log 
{ set-operation | 
get-operation | all } 

Optional 

Disabled by default. 

 

z 

When SNMP logging is enabled on a device, SNMP logs are output to the information center of the 

device. With the output destinations of the information center set, the output destinations of SNMP 

logs will be decided. 

z 

The severity level of SNMP logs is informational, that is, the logs are taken as general prompt 

information of the device. To view SNMP logs, you need to enable the information center to output 

system information with informational level.  

z 

For detailed description on system information and information center, refer to the Information 

Center Configuration part in this manual. 

 

Display the SNMP information 
about the current device 

display snmp-agent sys-info [ contact | 
location | version ]* 

Display SNMP packet statistics 

Display the engine ID of the 
current device 

display snmp-agent { local-engineid | 
remote-engineid } 

Display group information 
about the device 

display snmp-agent group [ group-name ] 

Display SNMP user information 

display snmp-agent usm-user [ engineid 
engineid | username user-name | group 
group-name ]* 

Available in any 
view.