3com 5500-ei pwr Installation Instruction
1-3
To do…
Use the command…
Remarks
Add a local user and enter local
user view
user view
local-user user-name
Required
By default, no local user is
configured.
configured.
Configure a password for the
specified user
specified user
password { simple | cipher }
password
password
Optional
By default, no password is
configured.
configured.
Configure the service type as
FTP
FTP
service-type ftp
Required
By default, no service is
configured.
configured.
Enabling an FTP server
Follow these steps to enable an FTP server:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enable the FTP server function ftp server enable
Required
Disabled by default.
z
Only one user can access a 3com switch 5500-EI at a given time when the latter operates as an
FTP server.
z
Operating as an FTP server, a 3com switch 5500-EI cannot receive a file whose size exceeds its
storage space. The clients that attempt to upload such a file will be disconnected with the FTP
server due to lack of storage space on the FTP server.
z
When you log in to a Fabric consisting of multiple switches through an FTP client, after the FTP
client passes authentication, you can log in to the master device of the Fabric.
z
You cannot access a 3com switch 5500-EI operating as an FTP server through Microsoft Internet
Explorer. To do so, use other client software.
To protect unused sockets against attacks, the 3com switch 5500-EI provides the following functions:
z
TCP 21 is enabled only when you start the FTP server.
z
TCP 21 is disabled when you shut down the FTP server.
Configuring connection idle time
After the idle time is configured, if the server does not receive service requests from a client within a
specified time period, it terminates the connection with the client, thus preventing a user from occupying
the connection for a long time without performing any operation.