3com 5500-ei pwr Installation Instruction

 

1-2 

Information filtering by severity works this way: information with the severity value greater than the 

configured threshold is not output during the filtering. 

z 

If the threshold is set to 1, only information with the severity being emergencies will be output; 

z 

If the threshold is set to 8, information of all severities will be output. 

The system supports six information output destinations, including the Console, Monitor terminal 

(monitor), logbuffer, loghost, trapbuffer and SNMP. 

The system supports ten channels. The channels 0 through 5 have their default channel names and are 

associated with six output destinations by default. Both the channel names and the associations 

between the channels and output destinations can be changed through commands. 

Table 1-2 Information channels and output destinations 

0 console 

Console (Receives log, trap and debugging 
information.) 

1 monitor 

Monitor terminal (Receives log, trap and 
debugging information, facilitating remote 
maintenance.) 

2 loghost 

Log host (Receives log, trap and debugging 
information and information will be stored in files 
for future retrieval.) 

3 trapbuffer 

Trap buffer (Receives trap information, a buffer 
inside the device for recording information.) 

4 logbuffer 

Log buffer (Receives log information, a buffer 
inside the device for recording information.) 

5 

snmpagent 

SNMP NMS (Receives trap information.) 

6 channel6 

Not specified (Receives log, trap, and debugging 
information.) 

7 channel7 

Not specified (Receives log, trap, and debugging 
information.) 

8 channel8 

Not specified (Receives log, trap, and debugging 
information.) 

9 channel9 

Not specified (Receives log, trap, and debugging 
information.) 

 

Configurations for the six output destinations function independently and take effect only after the 

information center is enabled.