3com 5500-ei pwr Reference Guide

1-2

The 3com switch 5500-EI supports one user access at one time when it serves as the FTP server.

display ftp-server source-ip

Syntax

display ftp-server source-ip

View

Any view

Parameters

None

Description

Use the display ftp-server source-ip command to display the source IP address set for an FTP

server.

If a source interface is specified for the FTP server, the IP address of the source interface will be

displayed and the FTP client can only use this address as the destination address to connect to the

FTP server.

If neither source interface nor source IP address is specified, 0.0.0.0 will be displayed. In this case,

the FTP client can use any reachable IP address on the FTP server as the destination address to

connect to the FTP server.

To set the source IP address for an FTP server, use the ftp-server source-interface or the ftp-server

source-ip command.

Examples

# Display the source IP address configured for the FTP server.

<Sysname> display ftp-server source-ip