3com 5500-ei pwr Reference Guide

 

1-5 

preferentially. If you do not want to use the default precedence marking settings of the switch for voice 

VLAN traffic, you can use the voice vlan qos command to change the settings. 

 

z 

If you want to delete a VLAN with voice VLAN function enabled, you must disable the voice VLAN 

function first. 

z 

The voice VLAN function can be enabled for only one VLAN at one time.  

 

Related commands: display voice vlan status. 

# Create VLAN 2, and enable the voice VLAN function on it. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] vlan 2 

[Sysname-vlan2] quit 

[Sysname] voice vlan 2 enable 

# After the voice VLAN function of VLAN 2 is enabled, if you enable the voice VLAN function for other 

VLANs, the system will prompt that your configuration fails. 

[Sysname] voice vlan 4 enable 

Can't change voice vlan configuration when other voice vlan is running 

voice vlan aging minutes 

System view 

minutes: Sets the voice VLAN aging timer in minutes, in the range of 5 to 43200. 

Use the voice vlan aging command to set the voice VLAN aging timer. 

Use the undo voice vlan aging command to restore the default. 

By default, the voice VLAN aging timer is 1440 minutes. 

If a port is configured to work in automatic voice VLAN assignment mode, the switch automatically 

assigns the port to the voice VLAN when receiving a packet with the source MAC address matching an 

entry in the OUI list of the switch. As soon as the port is assigned to the voice VLAN, the voice VLAN