3com 5500-ei pwr Reference Guide

 

1-36 

If you specify to authenticate a client through public key on the server, the client needs to read the local 

private key when logging in to the SFTP server. Since both RSA and DSA are available for public key 

authentication, you need to use the identity-key key word to specify the algorithms to get correct local 

private key; otherwise you will fail to log in. 

# Connect the SFTP server with the IP address 10.1.1.2. Use the default encryption algorithm.  

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname]sftp 10.1.1.2 

Input Username: kk 

Trying 10.1.1.2... 

Press CTRL+K to abort 

Connected to 10.1.1.2 ... 

 

The Server is not authenticated. Do you continue access it?(Y/N):y 

Do you want to save the server's public key?(Y/N):y 

Enter password: 

 

sftp-client> 

sftp source-interface interface-type interface-number 

System view 

interface-type: Type of a source interface. It can be loopback or VLAN interface.  

interface-number: Number of a source interface.  

Use the sftp source-interface command to specify a source interface for the SFTP client. If the 

specified interface does not exist, the system prompts that the configuration fails.  

Use the undo sftp source-interface command to remove the specified source interface. Then the 

client accesses the SFTP server with the local device address determined by the system.  

# Specify VLAN-interface 1 as the source interface of the SFTP client.  

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] sftp source-interface Vlan-interface 1