3com 5500-ei pwr Reference Guide

 

1-6 

Absence of the size buffersize argument indicates that all trap information is displayed. 

# Display the status of the trap buffer and the records in the trap buffer. 

<Sysname> display trapbuffer 

Trapping Buffer Configuration and contents:enabled 

Allowed max buffer size : 1024 

Actual buffer size : 256 

Channel number : 3 , Channel name : trapbuffer 

Dropped messages : 0 

Overwritten messages : 0 

Current messages : 19 

 

#Apr  1 23:55:35:859 2006 Sysname L2INF/2/PORT LINK STATUS CHANGE:- 1 - 

 Trap 1.3.6.1.6.3.1.1.5.4(linkUp): portIndex is 4227762, ifAdminStatus is 1, ifOperStatus 

is 1 

 

#Apr  1 23:55:36:059 2006 Sysname L2INF/2/PORT LINK STATUS CHANGE:- 1 - 

 Trap 1.3.6.1.6.3.1.1.5.4(linkUp): portIndex is 4227794, ifAdminStatus is 1, ifOperStatus 

is 1 

…… 

<Omitted> 

info-center channel channel-number name channel-name 

undo info-center channel channel-number 

System view 

channel-number: Channel number, ranging from 0 to 9, corresponding to the 10 channels of the 

system. 

channel-name: Channel name, up to 30 characters in length. The name must start with an English letter, 

containing no special character but numbers and English letters only. 

Use the info-center channel name command to name the channel whose number is channel-number 

as channel-name. 

Use the undo info-center channel command to restore the default name of the channel whose 

number is channel-number.  

By default, the name of channel 0 to channel 9 is (in turn) console, monitor, loghost, trapbuffer, 

logbuffer, snmpagent, channel6, channel7, channel8, channel9. 

Do not configure two different channels with the same name.