3com 5500-ei pwr Reference Guide

 

1-21 

Use the terminal logging command to enable log terminal display. 

Use the undo terminal logging command to disable log terminal display. 

By default, log terminal display is enabled for console users and terminal users. 

# Disable log terminal display. 

<Sysname> undo terminal logging 

terminal monitor 

undo terminal monitor 

User view 

None 

Use the terminal monitor command to enable the debugging/log/trap information terminal display 

function.  

Use the undo terminal monitor command to disable the function. 

By default, this function is enabled for console users and terminal users. 

This command works only on the current terminal. The debugging/log/trap information can be output on 

the current terminal only after this command is executed in user view.  

z 

Disabling the function has the same effect as executing the following three commands: undo 

terminal debugging,  undo terminal logging and  undo terminal trapping. That is, no 

debugging/log/trap information will be displayed on the current terminal.  

z 

If the function is enabled, you can run the terminal debugging/undo terminal debugging, 

terminal logging/undo terminal logging or  terminal trapping/undo terminal trapping 

command to enable or disable debug/log/trap terminal output respectively. 

# Disable terminal display. 

<Sysname> undo terminal monitor 

terminal trapping 

undo terminal trapping