3com 5500-ei pwr Reference Guide

 

1-3 

clock timezone zone-name { add | minus } HH:MM:SS 

User view 

zone-name: Name of the time zone, in length of 1 to 32 characters. 

add: Specifies to add a time value based on the universal time coordinated (UTC) time to generate a 

later time. 

minus: Specifies to subtract a time value based on the UTC time to generate an earlier time. 

HH:MM:SS: Time to be added or subtracted from the UTC time, in the form of HH:MM:SS. 

Use the clock timezone command to set the local time zone. 

Use the undo clock timezone command to restore the local time zone to the default UTC time zone. 

After the setting, you can use the display clock command to check the setting. The log information time 

and the debugging information time adopts the local time after the time zone and the summer time have 

been adjusted. 

Related commands: clock summer-time, display clock. 

# Set the local time zone named z5, which is five hours ahead of the UTC time. 

<Sysname> clock timezone z5 add 05:00:00 

<Sysname> display clock 

05:03:17 z5 Mon 01/01/2001 

Time Zone : z5 add 05:00:00 

Summer-Time : abc1 one-off 06:00:00 08/01/2005 06:00:00 09/01/2005  01:00:00 

quit 

Any view 

None 

Use the quit command to return from current view to a lower level view.