3com 5500-ei pwr Reference Guide

 

1-7 

interface-type: Interface type. 

interface-number: Interface number. 

module-name: Functional module name. 

fabric: Specifies to display the enabled debugging of the switches in the Fabric. 

by-module: Specifies to display fabric debugging by module. 

Use the display debugging command to display enabled debugging on a specified device or the whole 

Fabric.  

# Display enabled debugging on unit 1. 

<Sysname> display debugging unit 1 

IP icmp debugging is on 

Rip packet debugging switch is on 

Rip receive debugging switch is on 

Rip send debugging switch is on 

Any view 

None 

Use the display version command to display the version information about the switch system. 

Specifically, you can use this command to check the software version and release time, the basic 

hardware configuration, and some other information about the switch. 

# Display the version information of the system. 

<Sysname> display version 

3Com Corporation 

Switch 5500-EI Software Version 3Com OS V3.03.02s56e 

Copyright (c) 2004-2008 3Com Corporation and its licensors, All rights reserved. 

Switch 5500-EI uptime is 0 week, 0 day, 0 hour, 26 minutes 

Switch 5500-EI 52-Port with 1 Processor 

64M     bytes DRAM 

16384K  bytes Flash Memory 

Config Register points to FLASH 

CPLD Version is CPLD 001