3com 5500-ei pwr Reference Guide

 

2-1 

mac-address-mapping index source-vlan source-vlan-list destination-vlan dest-vlan-id 

undo mac-address-mapping { index | all } 

Ethernet port view 

index: Index of the inter-VLAN MAC address replicating configuration to be created or removed. This 

argument is in the range 0 to 7.  

source-vlan source-vlan-list: Specifies a list of the IDs of the VLANs, whose MAC address entries are 

to be replicated to the MAC address table of the destination VLAN. You need to provide the 

source-vlan-list argument in the form of { vlan-id [ to  vlan-id ] }&<1-10>, where the VLAN ID after the to 

keyword must be larger than or equal to the VLAN ID before the to keyword and &<1-10> means that 

you can specify up to 10 VLANs/VLAN ranges for this argument. 

dest-vlan-id: ID of the destination VLAN for replication, in the range 1 to 4094.  

all: Removes all the inter-VLAN MAC address replicating configurations created on the current port.  

Use the mac-address-mapping command to configure the inter-VLAN MAC address replicating 

feature for a port. This feature can replicate MAC address entries of the MAC address tables of 

specified source VLANs to the MAC address table of the specified destination VLAN.  

Use the undo mac-address-mapping command to disable this feature.  

The inter-VLAN MAC address replicating feature is disabled on any port by default.  

In a selective QinQ application, you can configure this feature to: 

z 

Replicate MAC address entries in the MAC address tables of the outer VLANs configured in 

selective QinQ to the MAC address table of the default VLAN of the downlink port. This is for 

forwarding uplink packets to the operator network. 

z 

Replicate MAC address entries in the MAC address table of the default VLAN of the downlink port 

to the MAC address tables of all the outer VLANs configured in selective QinQ. This is for 

forwarding packets from the operator network to the user networks.