3com 5500-ei pwr Reference Guide

 

1-33 

Use the statistics keep-time command to configure the retaining time of the test statistics. 

Use the undo statistics keep-time command to remove your configuration and restore the default. 

# Configure the retaining time of the test statistics to 180 minutes. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z 

[Sysname] remote-ping administrator icmp 

[Sysname-remote-ping-administrator-icmp] statistics keep-time 180 

test-time begin { hh:mm :ss [ yyyy/mm/dd ] | now } lifetime lifetime 

remote-ping test group view 

hh:mm:ss: Test start time. 

yyyy/mm/dd: Test start time, yyyy is the year in the range 2000 to 2099, mm is the month in the range 1 

to 12 and dd is the date in the range 1 to 31. 

now: Specifies a test that starts from now. 

lifetime: Lasting time of a test, in the range 1 to 2147483647 in seconds. 

Use the test-time begin command to configure the start time and the lasting time of a test. 

Use the undo test-time command to stop the test and remove the configuration. 

z 

When the test is not performed, the configuration information you input is saved, including test start 

time and lasting time. 

z 

If you set a start time earlier than the current system time or the test lasting time you configured is 

0, the test will not be performed. 

z 

When a test is being performed, you cannot perform any configuration; otherwise the system 

prompts error. 

z 

After you configure this command, if the test-related parameters are not complete, the system 

prompts configuration error. 

z 

The test starts until you execute the test-time begin command. 

z 

If you set a start time earlier than the current system time, when you modify the current system time, 

the test will not be performed. 

z 

If lifetime of the test group expires, the test will stop and when you modify the current system time, 

the test will not be performed.