Manualsbrain.com
  1. Manuals
  2. Brands
  3. 3com
  4. 5500-ei pwr
  5. Reference Guide

3com 5500-ei pwr Reference Guide

Download
Page of 1314
 
1-3 
flush enable control-vlan 
Syntax 
flush enable control-vlan vlan-id  
undo flush enable 
View 
Smart link group view 
Parameters 
vlan-id: Control VLAN ID, in the range of 1 to 4,094.  
Description 
Use the flush enable control-vlan command to enable the function of sending flush messages in the 
specified control VLAN.  
Use the undo flush enable control-vlan command to disable the function of sending flush messages 
to the specified control VLAN.  
By default, no control VLAN is specified.  
Examples 
# Configure to send flush messages within control VLAN 1.  
<Sysname> system-view 
System View: return to User View with Ctrl+Z. 
[Sysname] smart-link group 1 
[Sysname-smlk-group1] flush enable control-vlan 1 
link-aggregation group  
Syntax 
link-aggregation group group-id { master | slave } 
undo link-aggregation group group-id  
View 
Smart link group view 
Parameters 
group-id: Link aggregation group ID, in the range of 1 to 416. Note that the specified link aggregation 
group can only be a static or manual one.  
master: Specifies the specified link aggregation group as the master port of the smart link group.  
slave: Specifies the specified link aggregation group as the slave port of the smart link group.  
Description 
Use the link-aggregation group command to assign a link aggregation group to the smart link group.  
Use the undo link-aggregation group command to remove the specified link aggregation group from 
the smart link group.