3com 5500-ei pwr Reference Guide

 

2-5 

A port or a link aggregation group cannot serve as a member port for two smart link groups. On the 

other hand, a port or a link aggregation group cannot serve as a member for a smart link group and a 

monitor link group at the same time. However, a smart link group can serve as the uplink member port 

of a monitor link group. 

 

# Configure Ethernet 1/0/8 as a downlink port of monitor link group 1.  

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] interface Ethernet 1/0/8 

[Sysname-Ethernet1/0/8] port monitor-link group 1 downlink 

smart-link group group-id uplink 

undo smart-link group group-id 

Monitor link group view 

group-id: Smart link group ID, ranging 1 to 24.  

uplink: Specifies the specified smart link group as the uplink port of the monitor link group 

Use the smart-link group command to configure the specified smart link group as the uplink port of the 

monitor link group.  

Use the undo smart-link group command to remove the configuration.  

A smart link group can belong to only one monitor link group and can be configured only as an uplink 

port of the monitor link group.  

# Configure smart link group 1 as the uplink port of monitor link group 1.  

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] monitor-link group 1 

[Sysname-mtlk-group1] smart-link group 1 uplink