3com 5500-ei pwr Reference Guide

 

1-5 

7: Sets the databits to 7. 

8: Sets the databits to 8. 

Use the databits command to set the databits for the user interface. 

Use the undo databits command to revert to the default databits. 

The default databits is 8. 

# Set the databits to 7. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] user-interface aux 0 

[Sysname-ui-aux0] databits 7 

Any view 

None 

Use the display telnet-server source-ip command to display the source IP address configured for the 

switch operating as the Telnet server. That is, when the switch operates as the Telnet server, the client 

uses this IP address to log in to the switch. 

z 

If the source IP address or source interface is specified for the switch, this command displays the 

IP address or the primary IP address of the source interface. 

z 

If neither source IP address nor source interface is specified, 0.0.0.0 is displayed. That is, as long 

as there is a route between the switch and client, the client can log in to the switch using the IP 

address of any Layer 3 interface on the switch. 

 

When you use the display telnet-server source-ip command to display the source IP address, the 

primary IP address of an interface will be displayed even if you have specified a secondary IP address 

of the interface as the source IP address.