3com 5500-ei pwr Reference Guide

 

1-36 

Use the undo  storm-constrain  enable  command to disable log/trap information from being output 

when traffic received on the port exceeds the upper threshold or falls below the lower threshold.  

By default, log/trap information is output when traffic received on the port exceeds the upper threshold 

or falls below the lower threshold.  

Related commands: display storm-constrain, storm-constrain. 

# Disable log information from being output when traffic received on Ethernet 1/0/1 exceeds the upper 

threshold or falls below the lower threshold.  

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] interface Ethernet 1/0/1 

[Sysname-Ethernet1/0/1] undo storm-constrain enable log 

storm-constrain interval interval-value 

undo storm-constrain interval 

System view 

interval-value: Interval to collect traffic statistics, in the range of 1 to 300 (in seconds). 

Use the storm-constrain interval command to set the interval to collect traffic statistics.  

Use the undo storm-constrain interval command to restore the default setting. 

By default, the interval is 10 seconds.  

Related commands: display storm-constrain, storm-constrain. 

# Set the interval to collect traffic statistics to 2 seconds.  

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] storm-constrain interval 2 

unicast-suppression { ratio | pps max-pps } 

undo unicast-suppression