3com 5500-ei pwr Reference Guide

 

1-6 

auto: Disables automatically the corresponding port when DLDP detects an unidirectional link or finds 

in the enhanced mode that the peer port is down. 

manual: Generates log and traps and prompts the user to disable manually the corresponding port 

when DLDP detects an unidirectional link or finds in the enhanced mode that the peer port is down. After 

the port is disabled, it stops sending and receiving DLDP packets. 

Use the dldp unidirectional-shutdown command to set the DLDP handling mode after a unidirectional 

link is found. 

Use the undo dldp unidirectional-shutdown command to restore the default DLDP handling mode 

after a unidirectional link is found. 

By default, the DLDP handling mode after a unidirectional link is found is auto. 

Related commands: dldp work-mode. 

# Configure DLDP to automatically disable the corresponding port when a unidirectional link is found. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] dldp unidirectional-shutdown auto 

dldp work-mode { enhance | normal } 

undo dldp work-mode 

System view 

enhance: Configures DLDP to work in enhanced mode. In this mode, DLDP detects whether neighbors 

exist when neighbor tables are aging. 

normal: Configures DLDP to work in normal mode. In this mode, DLDP does not detect whether 

neighbors exist when neighbor tables are aging. 

Use the dldp work-mode command to set the DLDP operating mode. 

Use the undo dldp work-mode command to restore the default DLDP operating mode. 

By default, DLDP works in normal mode.