3com 5500-ei pwr Reference Guide

 

1-6 

retry retry-times 

undo retry 

Detected group view 

retry-times: Maximum retry times during a detect operation. This argument ranges from 0 to 10 and 

defaults to 2. 

Use the retry command to set the maximum retry times during a detect operation.  

Use the undo retry command to restore the default times. 

By default, the maximum retry times during a detect operation is two. 

When an Auto Detect-enabled switch detects objects, it sends an ICMP Request to each detected 

object. If the switch fails to receive an ICMP Reply from the object within the time waiting for an ICMP 

Reply configured with the time wait command, the switch re-sends an ICMP Request until the 

maximum retry times configured with the retry command is reached. If still no ICMP Reply is received, 

the destination IP address is considered as unreachable. 

# Specify the maximum number of retires to 3 for detected group 10. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] detect-group 10 

[Sysname-detect-group-10] retry 3 

standby detect-group group-number 

undo standby detect-group  

VLAN interface view 

group-number: Detected group number ranging from 1 to 25. 

Use the standby detect-group command to configure the interface backup function by using the auto 

detect function.